Installing the Drum Unit
1) Open the front cover
3) Turn the lock lever as shown below to release the collected
toner container.
4) Take out the collected toner container.
9
Installation > Making Pre-Checks > Selecting the Site of Installation
2) Press the button on the right cover to open the right door.
CAUTION:
To prevent the drum unit from being
damaged, keep the right cover open
at least 5 cm during the installation
procedure.
F-9-11
F-9-11
5) Remove one screw from the developer pressure lever.
The screw does not exist in some machine versions by
destination.
6) Turn the lever as shown below to release the drum unit.
x1
F-9-13
F-9-13
9
Installation > Making Pre-Checks > Selecting the Site of Installation
F-9-12
F-9-12
7) Remove the drum cover. (Keep the drum cover because it
may be used later for machine relocation.)
F-9-14
F-9-14
9-9
F-9-15
F-9-15
9-9