Cassette Heater Unit 37
Checking the Contents
[1] Cassette Heater Unit x 1
[5] Screw (P Tight; M3x8) x 1
* The 2-Cassette Hearter Unit Model does not use.
Points to Note before Installation
CAUTION:
- Check that the Heater PCB-J1 is installed. If not, install the Heater PCB-J1 before installing the Cassette Heater Unit.
- The Cassette Heater Sheet and Warning High Temperature Label used for the 250-sheet Cassette Model is packed with the Heater PCB -J1.
9
Installation > Cassette Heater Unit 37 > Points to Note before Installation
[2] Heater Connector Cover x 1
9
Installation > Cassette Heater Unit 37 > Points to Note before Installation
[3] Wire Saddle x 1
[4] Screw
(W Sems Round End; M3X6) x 1
9-59
9-59