Canon imageRUNNER 2530 Service Manual page 284

10) Put the longer harness out of two through the hole of the rear frame.
12) Install the heater PCB.
•
Screw (1 pc.)
x1
9
Installation > Cst Heater Kit-J1 Installation Procedure > Installation Procedure
11) Joint the connector of the longer harness of the heater SW harness to J108
of the power supply unit.
x1
F-9-102 F-9-102
9 Installation > Cst Heater Kit-J1 Installation Procedure > Installation Procedure
F-9-103 F-9-103
F-9-104 F-9-104
9-48
9-48