3) Fit the claws (3 places) on the Cassette Heater Unit into the holes on the Base Plate, and then move it toward the front.
•
3 Claws
CAIUTION:
Be sure
that the
claws are
Base Plate
fit into the
holes of
the Base
Plate
properly.
5) Install the heater Connector Cover.
6) Install the removed Cassettes.
7) Check that the Environment Heater switch is ON.
8) Plug the power plug of the host machine to the outlet.
9) Turn ON the main power switch.
9
Installation > Cassette Heater Unit 37 > Installation Procedure > In case of Options(CST. Feeding Unit)
Cassette Heater Unit
Cassette Heater Unit
Base Plate
9
Installation > Cassette Heater Unit 37 > Installation Procedure > In case of Options(CST. Feeding Unit)
4) Tighten the removed screw (W sems round end;M3X6) with the
stubby driver to connect the connector.
Connector
F-9-139
9-64
F-9-140
9-64