Setting The Cassettes - Canon imageRUNNER 2530 Service Manual

Setting the Cassettes

1) Press the cassette release button to draw out the cassette forward.
2) Confirm the type of paper used by the customer.
3) While nipping the trailing edge guide lever, slide the trailing edge guide to the position corresponding to the prescribed paper size.
4) While nipping the side guide lever, slide the side guide to the position corresponding to the prescribed paper size.
<550 sheets cassette> Side Guide Plate
Trail Edge Guide Plate Lever
Trail Edge Guide Plate
5-a) 500-sheet cassette: Set the supplied paper size label as shown below so that the size of the paper loaded
in the cassette is shown below.
<550 sheets cassette>
9
Installation > Making Pre-Checks > Selecting the Site of Installation
<250 sheets cassette>
Side Guide Plate Lever
Trail Edge Guide Plate Lever
9 Installation > Making Pre-Checks > Selecting the Site of Installation
Side Guide Plate
Side Guide Plate Lever
F-9-24 F-9-24
5-b) 250-sheet cassette: Affix the cassette size label corresponding to the size of the paper to
be loaded in the cassette to the cassette size plate. Insert the cassette size plate into the
cassette as shown.
<250 sheets cassette>
A4
F-9-25 F-9-25
9-13
F-9-26 F-9-26
9-13