Canon imageRUNNER 2530 Service Manual page 93

2
Technology > Pickup Feed System > Controls > Cassette Pickup Assembly (250-sheet 1st cassette model)
Paper Size Detection
Paper size of the cassette can be automatically detected by adjusting the position of the
guide plate.
Concavo-convex area of the cassette dial is switched when the guide plate is shifted and two
Size Switches on a printer are switched. Length and width are detected according to the ON
/ OFF combination of switches. As long as standard paper, both AB type and inch type can
be used. However, size should be found manually on the check screen for the combination of
A5-Rand STMT-R or the combination of B5-R and EXEC.
SW6
SW7
2 Technology > Pickup Feed System > Controls > Cassette Pickup Assembly (250-sheet 1st cassette model)
Rear guide plate
F-2-93 F-2-93
Cassette size
switch (SW6)
Detection
dial
Side guide plate
2-65
Cassette size
switch (SW7)
Rear
detection
rink
Detection
Cassette size
dial
switch (SW6)
F-2-94 F-2-94
2-65