Canon imageRUNNER 2530 Service Manual page 286

16) Clamp the harness in the 4 wire saddles.
17) Joint the connector of the heater DC harness to J113B on the power supply unit.
CAUTION:
Scatter the slack of the wire and comfirm which the do not touch the part of the primary circuit.
18) Install the heater AC harness as shown in the figure. Joint the connector of the longest branch of the heater AC harness to the cassette
junction bracket.
9
Installation > Cst Heater Kit-J1 Installation Procedure > Installation Procedure
9 Installation > Cst Heater Kit-J1 Installation Procedure > Installation Procedure
x4
F-9-107 F-9-107
F-9-108 F-9-108
9-50
9-50