Canon imageRUNNER 2530 Service Manual page 264

b.Installing the Card Reader and the USB Application 3-Port Interface Kit-A1 at the same time
1) Install USB USB Application 3-Port Interface Kit-A1 earlier.
2) Remove the cable cover of USB Application 3-Port Interface Kit-A1.
•
Claws (2 pcs.)
x2
Claw
5) Perform steps 15) to 16) of " a. Installing the card reader in a simple substance ".
6) Route the cable to the USB cable guide.
9
Installation > Card Reader Installation Procedure > Installation Procedure
3) Perform steps 1) to 12) of "a. Installing the card reader in a simple substance ".
4) Attach the card reader to the reader using the 2 bundled TP screws (M4x16).
Claw
F-9-64 F-9-64
7) Perform steps 18) to 21) and steps 23) to 25) of " a. Installing the card reader in a simple substance ".
8) Attach the cable cover of USB Application 3-Port Interface Kit-A1.
F-9-66 F-9-66
9 Installation > Card Reader Installation Procedure > Installation Procedure
x2
9-28
F-9-65 F-9-65
9-28