Network Advisor 11.0.X To 11.1.X Command Mapping - Brocade Communications Systems Brocade 8/12c Manual

Network Advisor 11.0.X to 11.1.X command mapping

Network Advisor 11.0.X to 11.1.X command mapping
Table 28 details the changes in the SAN tab menu command mapping between Network Advisor 11.0.X and 11.1.X.
For a list of all menus and commands, refer to the Brocade Network Advisor User Manual or online help.
TABLE 28
SAN tab command mapping
Network Advisor 11.0.X command mapping
Discover > Setup
Configure > Port Fencing
Configure > IP Troubleshooting > Ping
Configure > IP Troubleshooting > Trace Route
Configure > IP Troubleshooting > Performance
Configure > Switch > Save
Configure > Switch > Save Running to Startup
Configure > Switch > Restore
Configure > Switch > CEE
Configure > Switch > FCoE
Configure > Switch > Configuration Repository
Configure > Switch > Schedule Backup
Configure > Switch > Replicate > Configuration
Configure > Switch > Replicate > Security
Configure > Switch > Swap Blades
Configure > Logical Switches
Configure > List Zone Members
Monitor > Performance > Configure Thresholds
70 of 82
Network Advisor 11.1.X command mapping
Discover > Fabrics
Discover > Host Adapters
Monitor > Fabric Watch > Port Fencing
Configure > FCIP Troubleshooting > Ping
Configure > FCIP Troubleshooting > Trace Route
Configure > FCIP Troubleshooting > Performance
Configure > Configuration > Save
Configure > Configuration > Save Running to Startup.
Configure > Configuration > Restore
Configure > DCB
Configure > FCoE
Configure > Configuration > Configuration Repository
Configure > Configuration > Schedule Backup
Configure > Configuration > Replicate > Configuration
Configure > Configuration > Replicate > Security
Configure > Configuration > Swap Blades
Configure > Virtual Fabric > Logical Switches
Configure > Zoning > List Zone Members
Monitor > Fabric Watch > Performance Thresholds
Brocade Network Advisor Migration Guide
53-1002321-01