Installing The Smart Card Driver On The Remote Client; Detecting And Correcting A Default Linux Smart Card Driver - Brocade Communications Systems StoreFabric SN6500B Installation Manual

Brocade network advisor installation and migration guide v12.0.0 (53-1002699-01, march 2013)
Hide thumbs Also See for StoreFabric SN6500B:
Table of Contents

Advertisement

2
Smart Card driver installation

Installing the Smart Card driver on the remote client

1. Complete steps 1 through 4 in
2. Run the following commands to support remote clients (Web Start).

Detecting and correcting a default Linux Smart Card driver

This section applies to the Linux system only. Some Linux systems may provide a default Smart
Card driver and have their own setup to activate it. In this case, you must use the driver provided
with Network Advisor. Otherwise, there could be an incompatibility issue between the driver and the
native library that could cause a driver detection failure. Complete the following steps to discover
whether a default driver already exists and how to reconfigure the driver environment.
1. Detect a different Smart Card driver by running the following commands:
2. Make sure the pcscd file on the /etc/init.d directory is linked to /opt/pcsc/pcscctl by running
34
> cd /usr/lib
> ln –s /opt/pcsc/lib/libpcsclite.so .
NOTE
If a soft link exists on libpcsclite.so, make sure that the final file is linked to
/opt/pcsc/lib/libpcsclite.so.xxx. It is recommended that you back up the original.
Example
> ls –l
libpcsc*
lrwxrwxrwx 1 root root
libpcsclite.so.1.0.0
lrwxrwxrwx 1 root root
libpcsclite.so.1.0.0
lrwxrwxrwx 1 root root
> mv libpcsclite.so.1.0.0 libpcsclite.so.1.0.0.org
> ln -s /opt/pcsc/lib/libpcsclite.so.1.0.0
> ls –l
libpcsc*
lrwxrwxrwx 1 root root
libpcsclite.so.1.0.0
lrwxrwxrwx 1 root root
libpcsclite.so.1.0.0
lrwxrwxrwx 1 root root
/opt/pcsc/lib/libpcsclite.so.1.0.0
-rwxr-xr-x 1 root root 35428 Aug
> cd /
> find . –name pcscd –print
If the results contain "pcscd", and it is not located under /opt/pcsc or /etc/init.d/pcscd, a
different driver exists on the system.
the following commands:
> cd /etc/init.d
> ls –l pcscd
lrwxrwxrwx 1 root root 17 Jul 28 01:29 pcscd -> /opt/pcsc/pcscctl
"Installing the Smart Card driver on the local client"
20 Aug
4 16:16 libpcsclite.so ->
20 Jun
4 12:30 libpcsclite.so.1 ->
34 Aug
5 14:36 libpcsclite.so.1.0.0
20 Aug
4 16:16 libpcsclite.so ->
20 Jun
4 12:30 libpcsclite.so.1 ->
34 Aug
5 14:36 libpcsclite.so.1.0.0 ->
4 16:17 libpcsclite.so.1.0.0.org
Network Advisor Installation and Migration Guide
on page 32.
libpcsclite.so.1.0.0
53-1002699-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Network advisor 12.0.0

Table of Contents