Brocade Communications Systems WFT-2D User Manual page 1751

TABLE 395
Field
SPEED_TYPE
EXT_TYPE
TABLE 396
Field
PORT_ID
SWITCH_ID
TX
RX
TX_UTILIZATION
RX_UTILIZATION
LINK_FAILURE
TX_LINK_RESETS
RX_LINK_RESETS
SYNC_LOSSES
SIGNAL_LOSSES
SEQUENCE_ERRORS
Brocade Network Advisor SAN User Manual
53-1003154-01
SWITCH_PORT (Continued)
Definition
Stores the speed type of the port. It contains one of
the following values:
•
1 - Indicates speed is in Mbps.
•
2 - Indicates speed is in Gbps.
Refers to the extended type of the port . Eg
Mirror-Port.
SWITCH_PORT_PERFORMANCE
Definition
Primary key of the Switch Port.
Primary key of Virtual Switch which this port is
present
The number of octets or bytes that have been
transmitted by this port. One second periodic polling
of the port. This value is saved and compared with
the next polled value to compute net throughput.
Note, for Fibre Channel, ordered sets are not
included in the count
The number of octets or bytes that have been
received by this port. One second periodic polling of
the port. This value is saved and compared with the
next polled value to compute net throughput. Note,
for Fibre Channel, ordered sets are not included in
the count
The computed value of TX based on speed of port
'The computed value of RX based on speed of port
Count of link failures. This count is part of the Link
Error Status Block (LESB). (FC-PH 29.8). Note, this is
a Fibre Channel only stat
Count of Link resets. This is the number of LRs
received. Note, this is a Fibre Channel only stat
Count of Link resets. This is the number LRs
transmitted. Note, this is a Fibre Channel only stat
Count of instances of synchronization loss detected
at port. This count is part of the Link Error Status
Block (LESB). (FC-PH 29.8). Note, this is a Fibre
Channel only stat.
Count of instances of signal loss detected at port.
This count is part of the Link Error Status Block
(LESB). (FC-PH 29.8). Note, this is a Fibre Channel
only stat
Count of primitive sequence protocol errors detected
at this port. This count is part of the Link Error Status
Block (LESB). (FC-PH 29.8). Note, this is a Fibre
Channel only stat
Database tables and fields
Format
int
varchar
Format
int
int
double
precision
double
precision
double
precision
double
precision
double
precision
double
precision
double
precision
double
precision
double
precision
double
precision
H
Size
128
Size
1699