Original Modes - Gestetner B130 Service Manual

IMAGE PROCESSING

6.11.3 ORIGINAL MODES

The machine offers seven "original" modes for copy operation. Fax-equipped
machines also offer four original modes for fax operation.
Selection of Original Modes, for Copying
The user selects the mode using User Tools. The user can also assign any two of
these modes to the "mode indicators" on the panel, so that they can be accessed
with a single button press. (Although the upper indicator is nominally for "Text" and
the lower is for "Photo," in fact the user can assign any mode to either indicator.)
Selection of Original Modes, for Fax
Before scanning, the user selects Text or Photo at the operation panel.
• If Text: The machine uses Text 1 (Sharp), unless a serviceperson has changed
the mode to Text 2 (Dropout).
• If Photo: The machine uses the photo mode selected by User Parameter switch
10 bit 7 (where "0" selects Photo Normal and "1" selects Photo Smooth).
If the user is having a problem with text-mode quality, please try to resolve the
problem by adjusting the settings for Text Mode 1. Do not try to solve the problem
by changing the mode to Text Mode 2. Text Mode 2 is designed for very specific
uses only (for machines that are almost exclusively used to send preprinted forms
with unneeded background color), and is rarely appropriate outside of Japan.
The text mode used by the machine is determined by the value of SRAM address
410D48h. To change the text mode, you must use SP7-955 to manually change the
value at this address. To change to Text Mode 2 (Dropout), write 0Ah into this
address. To change back to Text Mode 1 (Sharp), write 07h into this address.
B129 Series/B044 Series
CÓPIA NÃO CONTROLADA
6-22
CÓPIA NÃO CONTROLADA
SM