Adf Image Adjustment - Gestetner B070 Service Manual

COPY IMAGE ADJUSTMENT: PRINTING/SCANNING

3.17.4 ADF IMAGE ADJUSTMENT

Registration
NOTE: Make a temporary test chart as shown below left, using A3/DLT paper.
1. Place the temporary test chart on the ADF and make a copy from one of the
feed stations.
2. Check the registration, and adjust using the following SP modes if necessary.
Side-to-side Registration
Leading Edge Registration (Thin original mode)
Leading Edge Registration (Single-sided/Duplex: front)
Leading Edge Registration (Duplex: rear)
B070R637.WMF
B070/B071
CÓPIA NÃO CONTROLADA
A: Leading Edge Registration
B: Side-to-side Registration
3-154
CÓPIA NÃO CONTROLADA
SP mode
SP6006 1
SP6006 2
SP6006 3
SP6006 4
A
B
B070R692.WMF
SM