Toner Supply Clutch; High-Voltage Power Supply Board - Gestetner B130 Service Manual

TONER SUPPLY CLUTCH

3.7 TONER SUPPLY CLUTCH
1. Toner bottle holder
2. Copy tray ( 3.3.3)
3. Rear cover (
4. Disconnect the connector on C19
on the BICU.
5. Push the clutch coupler [A] to the
rear side, and remove the clip
ring [B] from the back of the
copier.
6. Coupler and spring [C]
7. Remove the cone and spring (B044/B045/B046 only). Lift the toner supply
clutch [D] and remove it.
NOTE: When removing, note how the wire goes through a clamp, and also
note where it passes through the rear of the machine.

3.8 HIGH-VOLTAGE POWER SUPPLY BOARD

1. Rear cover (
2. High-voltage power supply board [A]
× 4)
(all 's,
NOTE: Remove the insulating sheet [B] if you are going to remove the contact-
release solenoid (
B129 Series/B044 Series
CÓPIA NÃO CONTROLADA
3.3.2)
3.3.2)
3.5.9) or the gear cover (
CÓPIA NÃO CONTROLADA
[D]
[A]
[B]
[B]
[A]
3.10.7).
3-22
[C]
B130R954.WMF
B130R924.WMF
SM