Nvram Data Upload/Download (B130/B168/B169); Uploading Nvram Data - Gestetner B130 Service Manual

5.2.4 NVRAM DATA UPLOAD/DOWNLOAD (B130/B168/B169)

This section is for the MFP model (B130), the copier/facsimile model (B168), and
the copier/printer/scanner model (B169) ONLY. This section illustrates how to copy
the data from the controller NVRAM to an SD card. (See "Uploading NVRAM Data"
on this page.)
Data can also be copied from an SD card to the controller NVRAM (See
"Downloading SD Card Data" on the following page). For the workflow to copy the
data in the BICU NVRAM, see section 5.1.9.
NOTE: The procedure in this section does not upload or download the NVRAM
data on the BICU. See section 5.1.9 for the procedure to upload or
download the NVRAM data on the BICU.

Uploading NVRAM Data

NVRAM data can be copied to an SD card.
1. Activate the SP mode.
2. Select SP5-990-001, and output the SMC report. You may need this data if
uploading fails.
3. Turn off the main power switch.
4. Insert the SD card into the lower slot.
5. Turn on the main power switch.
6. Activate the SP mode.
7. Select SP5-824-001 (NVRAM Upload).
8. Press the Execute key. The copier starts uploading and makes the following file
in the following folder:
NVRAM\serial_number.NV
where "serial_number" is the serial number. If, for example, the serial number
is "B0700017," the folder name and the file name are as follows:
NVRAM\B0700017.NV
9. Make a label that indicates the contents of the SD card, and attach it to the SD
card.
NOTE: An SD card can store the NVRAM data of two or more machines.
SM
CÓPIA NÃO CONTROLADA
FIRMWARE UPDATE PROCEDURE (B130/B168/B169)
5-111
CÓPIA NÃO CONTROLADA
B129 Series/B044 Series