Microscopy System Using Diascopic Illumination And Epi-Fluorescence Illumination; Names Of The Devices And Operation Sections - Nikon SMZ25 Instruction Manual

Microscopy System Using Diascopic Illumination and Epi-fluorescence
2
Illumination

Names of the Devices and Operation Sections

2.1
P2-TERG 100
Trinocular Tilting Tube
P2-EFLM Motorized
Epi Fluorescence
Attachment
SMZ25 Zooming Body
P2-CTLA Control Box
Light shielding plate
P2-DBL LED Diascopic
Illumination Base
LED power
ON/OFF switch
LED brightness control
dial
HG fiber
(to the HG precentered
fiber illuminator)
STOP switch
Power switch
AC adapter
input terminal
LED brightness control terminal
LED brightness control selection switch
For the names of the components needed for assembly and connections such as the fixing screws and connectors, see
Chapter 3, "3 Assembly Procedures."
Chapter 1
OCC adjustment
knob
Components
DS camera
Optical path switching lever
P2-MFU Motorized Focus Unit
Turret address check window
P2-RNI2 Intelligent Nosepiece
P2-RC Remote Controller
(See "2.2 Buttons on the
P2-RC Remote Controller.")
Prism sheet IN/OUT lever
Objective
Nosepiece
Stage plate
3
C-HGFIE HG
precentered fiber
illuminator
(Refer to the
instruction manual
supplied with the HG
precentered fiber
illuminator.)
Diopter adjustment ring
Eyepiece
Aperture diaphragm dial