Paper Feed Mechanism - Epson Stylus Pro GS6000 Service Manual

Epson Stylus Pro GS6000

4.4.10 Paper Feed Mechanism

4.4.10.1 PF ENC SCALE
1. Remove the TOP COVER (left only).
2. Remove the MAINTE COVER T.
3. Remove the SIDE COVER (left only).
4. Remove the two screws on the shaft.
A) Silver, Phillips, Pan with S.W & P.W M3x8: two pieces
5. Remove the four screws on the fixing plate and remove the plate.
B) Silver, Phillips, Cup P-tite M3x8: four pieces
In the next step, take care not to damage or contaminate the PF
C A U T I O N
ENC SCALE.
Do not touch the PF ENC SCALE with bare fingers and make
sure your gloves are not stained with ink before touching it.
6. Remove the PF ENC SCALE drawing it out from the slit of the PF ENCODER
ASSY.
As seen from the left
Figure 4-125. Removing the PF ENC SCALE
DISASSEMBLY & ASSEMBLY
(p85)
(p88)
(p89)
PF ENC SCALE
Fixing plate
Disassembly and Assembly Procedure
When installing the PF ENC SCALE, make sure to attach it so that
you can read the letters on it correctly.
As seen from the left
A D J U S T M E N T Be sure to refer to Chapter 5 "Adjustment"
R E Q U I R E D
specified adjustments after replacing or removing the PF ENC
SCALE.
<Adjustment item>
1. Encoder Test
A
B
Revision F
Letters
(see p184) and perform
155
Confidential