Service Program Basic Operations - Epson Stylus Pro GS6000 Service Manual

Epson Stylus Pro GS6000

5.1.5 Service Program Basic Operations

This section describes the basic operations of the Service Program.
The Service Program includes some adjustment items which should
C A U T I O N
not be performed at on-site service. Be sure not to perform any
adjustments that are not described in this manual at on-site service.
System Requirements
OS: Windows XP, VISTA
Interface: USB, Network
Startup
Make sure to connect one GS6000 to your computer at a time.
C A U T I O N
(Otherwise, an error message will appear on the Service Program
at the printer communication timing when the program detects
more than one printer; as is the case regardless of the model.)
1. When double-clicking the "ServProg.exe", the screen asking if you want to carry
out the NV-RAM BACKUP appears.
2. If Yes is selected, the NV-RAM BACKUP UTILITY will start up; If No is
selected, the Service Program Menu screen will appear.
Figure 5-1. Service Program Menu
ADJUSTMENT
NV-RAM BACKUP UTILITY
The utility for backing up or restoring NV-RAM parameters is started up.
Figure 5-2. NV-RAM BACKUP UTILITY
ADJUSTMENTS SEQUENCE
By selecting a part you replaced or repaired, this mode guides you to perform all the
required adjustments in a predetermined sequence.
1. Highlight the part you replaced or repaired in the left box and click the [Add]
button.
2. Click the [OK] button.
Figure 5-3. ADJUSTMENTS Sequence
Overview
Revision F
192
Confidential