Sensors - Epson Stylus Pro GS6000 Service Manual

Epson Stylus Pro GS6000

2.7 Sensors

Figure 2-6. Sensors
OPERATING PRINCIPLES
Diagram Name
1 PG HP Sensor
2 Paper Edge Sensor
3 Paper Rear Sensor
4 CR HP Sensor
5 M Cover Sensors
6 Lever Sensor
Waste Fluid Level
7
Switch Assy
8 Sub Tank Sensors
9 IC Cover Sensors
10 F Cover Sensors
Sensors
Revision F
Description
Detects the home position of the platen gap.
Detects the right and left ends of paper.
Detects the presence of paper.
Detects the home position of the Carriage Unit (CR
Cursor Assy.).
Detect the opening/closing status of the Maintenance
Covers.
Detects the position of the paper lever.
Detects the amount of waste ink. If the waste ink
exceeds specified level, the sensor reacts.
Detect the remaining ink in the Sub Tanks. Each tank
has two sensors, and the remaining ink is detected in
stages.
Detect the opening/closing status of the Ink Covers.
Detect the opening/closing status of the Front Cover.
Confidential
47