Epson Stylus Pro GS6000 Service Manual page 124

Epson Stylus Pro GS6000
When routing the cable on the left side, make sure to secure the
cable with the cable retainer and give it one turn around the
marked clamp as shown in the figure below.
PF ENCODER ASSY
A D J U S T M E N T Be sure to refer to Chapter 5 "Adjustment"
R E Q U I R E D
specified adjustments after replacing or removing this part.
<Adjustment item>
1. Encoder Test
DISASSEMBLY & ASSEMBLY
As seen from the left
Retainer
Clamp to turn
(see p184) and perform
Disassembly and Assembly Procedure
Revision F
124
Confidential