Epson Stylus Pro GS6000 Service Manual page 179

Epson Stylus Pro GS6000
4. Remove the four screws at the back and open the Rear Cover (not an ASP).
A) Silver, Phillips, Pan with S.W & P.W M3x6: four pieces
As seen from the rear
Rear Cover
Figure 4-161. Removing the Rear Cover
DISASSEMBLY & ASSEMBLY
5. Disconnect all the cables from the board.
6. Remove the four screws and remove the TAKE-UP CONT BOARD ASSY.
A) Silver, Phillips, Pan with S.W & P.W M3x6: four pieces
Inside the box
Take-UP Reel Unit
A
Connector assignment:
Connector No.
JP1
JP2
JP3
JP5
JP6
Disassembly and Assembly Procedure
TAKE-UP CONT BOARD ASSY
JP5
JP1
JP2
JP3
Figure 4-162. Removing the TAKE-UP CONT BOARD ASSY
Color
Black TAKE-UP SW ASSY
White TAKE-UP MOTOR
White TAKE-UP P/S BOARD ASSY (CN2)
White TAKE-UP SENSOR
White TAKE-UP SENSOR
Revision F
JP6
A
Destination
179
Confidential