Epson Stylus Pro GS6000 Service Manual page 182

Epson Stylus Pro GS6000
TAKE-UP MOTOR ASSY
1. Remove the Take-Up Unit Cover
2. Remove the TAKE-UP SENSOR.(p178)
3. Remove the TAKE-UP CONT BOARD
4. Remove the two screws and remove the fixing plate.
A) Silver, Phillips, Pan with S.W & P.W M4x8: two pieces
As seen from the right
Figure 4-167. Removing the Fixing plate
DISASSEMBLY & ASSEMBLY
(p177)
ASSY.(p178)
Fixing plate
Disassembly and Assembly Procedure
5. Remove the three screws and remove the Chain.
A) Silver, Phillips, Pan with S.W & P.W M4x8: three pieces
As seen from the right
6. Draw the TAKE-UP MOTOR ASSY from the hole and remove it.
As seen from the top
TAKE-UP MOTOR ASSY
A
Figure 4-169. Removing the TAKE-UP MOTOR ASSY
Chain
TAKE-UP MOTOR ASSY
Figure 4-168. Removing the Chain
Revision F
A
182
Confidential