Epson STYLUS PRO GS6000 Maintenance Schedule

EPSON STYLUS
MAINTENANCE SCHEDULE

REGULAR MAINTENANCE

This maintenance needs to be done at certain intervals or if a problem is seen with the printout.
Ensure that the printer is installed on a level floor with conditions of 20-30°C and 40-60% humidity.
You will require a Maintenance Kit and/or an Ink Cleaner Kit and/or a set of Cleaning Cartridges

MAINTENANCE KIT

Consists of: 2 pairs Plastic gloves, 1 x Flushing Pad, 12 x Cleaning sticks

INK CLEANER KIT

Consists of: 6 pairs Plastic gloves, Ink Cleaner, Plastic cup

CLEANING CARTRIDGES

8 x T6230 Cleaning cartridges for Head Washing

CARRIAGE RAIL WIPER

1 x Plastic Carriage Rail wiper, 1 x Carriage Rail Oil

CLEANING WIPER

WHEN?
Once a month
Or if prints are blurred or smeared
HOW?
Menus/Maintenance/Carriage Maintenance
Printhead moves to LHS. Use cleaning stick dipped in Ink cleaner as per instructions
Front of wiper (Left hand side) - Clean along wiper length
Back of wiper (Right hand side) - Wipe upwards along wiper
Discard cleaning stick

CLEANING AROUND PRINTHEAD

WHEN?
Once a month
Dust or ink causing dropouts or ink droplets
HOW?
Menus/Maintenance/Carriage Maintenance
The printhead moves over the space on the LHS of the printer. Using a torch examine the
areas around the printheads. If inky or dusty, wipe the surrounds with a dry cleaning stick
DO NOT TOUCH THE PRINTHEAD SURFACE!
® PRO GS6000