Electric Components - Epson Stylus Pro GS6000 Service Manual

Epson Stylus Pro GS6000

4.4.4 Electric Components

4.4.4.1 FUSE
In the next step, the cover will drop open suddenly immediately
C A U T I O N
after removing the last screw. Therefore, make sure to hold the
cover when removing the last few screws.
1. Remove the five screws and open the Elec Box.
A) Silver, Phillips, Pan with S.W & P.W M4x8: five pieces
As seen from the rear bottom
Figure 4-40. Opening the Elec Box
DISASSEMBLY & ASSEMBLY
Elec Box
A
Disassembly and Assembly Procedure
2. Pry the FUSE out.
Inside the box
Figure 4-41. Removing the FUSE
When replacing the FUSEs, make sure to use the following fuses
C A U T I O N
approved and designated by SEIKO EPSON CORPORATION.
φ
Size: 10.3 x 38mm (L)
Rating: 250V-15A
Manufacturer: SATO PARTS CO.,LTD
Model: F-7165
Revision F
FUSEs
Confidential
99