Remedies For Maintenance Requests - Epson Stylus Pro GS6000 Service Manual

Epson Stylus Pro GS6000

3.3 Remedies for Maintenance Requests

When a Maintenance Request error occurs, the printer displays on the LCD a hexadecimal code of "NNNN" which correspond to the bit numbers assigned to error statuses as shown
in the table below.
Bit assignment (Binary)
1 2 3 4 5 6
1 (N/A) 0 (N/A) (N/A) (N/A)
0 (N/A) 1 (N/A) (N/A) (N/A)
0 (N/A) 0 (N/A) (N/A) (N/A)
1 (N/A) 1 (N/A) (N/A) (N/A)
1 (N/A) 0 (N/A) (N/A) (N/A)
0 (N/A) 1 (N/A) (N/A) (N/A)
1 (N/A) 1 (N/A) (N/A) (N/A)
TROUBLE SHOOTING
Table 3-1. About the Maintenance Request NNNN
NNNN
(Hexa-
7
decimal)
The CR scan pass counter has reached the specified value. (CR MOTOR
0 0002 and INK TUBE are getting close to the end of their life.)
The RTC backup battery becomes exhausted.
0 0008
The date has not been set.
0080
1
The CR scan pass counter has reached the specified value (CR MOTOR
0 000A and INK TUBE are getting close to the end of their life.) and the RTC
backup battery becomes exhausted.
The CR scan pass counter has reached the specified value (CR MOTOR
0082 and INK TUBE are getting close to the end of their life.) and the date has
1
not been set.
The RTC backup battery becomes exhausted and The date has not been
1 0088
set.
The CR scan pass counter has reached the specified value. (CR MOTOR
008A has reached its end of life.) The RTC backup battery becomes exhausted
1
and The date has not been set.
Remedies for Maintenance Requests
Cause Remedy
Replace the CR MOTOR (p.151) and the INK TUBE
(p.173) with a new one, perform the necessary adjustments
and clear the counter using the Service Program (p.233).
Replace the battery and make the date and time setting
using the service program (p.224).
Make the date and time setting using the Service Program
(p.224).
Refer to the corresponding remedies.
Refer to the corresponding remedies.
Refer to the corresponding remedies.
Refer to the corresponding remedies.
Revision F
54
Confidential