Epson Stylus Pro GS6000 Service Manual page 121

Epson Stylus Pro GS6000
4.4.6.10 SUB_C BOARD ASSY
1. Remove the REAR PAPER GUIDE.
2. Remove the SPINDLE GUIDE COVER.
3. Disconnect all the cables and FFCs from the SUB_C BOARD ASSY.
4. Remove the four screws, and remove the SUB_C BOARD ASSY.
A) Silver, Phillips, Cup M3x6: four pieces
Inside the REAR PAPER GUIDE
Figure 4-78. Removing the SUB_C BOARD ASSY
DISASSEMBLY & ASSEMBLY
(p96)
(p97)
SUB_C BOARD ASSY
A
Disassembly and Assembly Procedure
J8
J13
J14*
J12 J7*
Figure 4-79. Connector Layout of the SUB_C BOARD ASSY
Connector assignment:
Connector No. Color
Black MAIN BOARD ASSY (CN24)
J1
Black PF ENCODER ASSY
J2
White F COVER SENSOR (left)
J3
Blue MAIN BOARD ASSY (CN64)
J4
Yellow M COVER SENSOR (left)
J5
Red IC COVER SENSOR (left)
J6
Black Unused
J7*
Blue SUB TANK SENSOR
J8
Red SUB TANK SENSOR
J9
Yellow SUB TANK SENSOR
J10
Black SUB TANK SENSOR
J11
White P/S TERM BOARD ASSY (J4)
J12
J13 Gray SUB_B BOARD ASSY (J18)
Gray Unused
J14*
Some connectors are not used for this printer. Make sure not to
confuse them with the correct ones when reassembling.
Revision F
J9 J10 J11
J6
J5
J4
J3
J1 J2
*: Unused
Destination
Confidential
121