Epson Stylus Pro GS6000 Service Manual page 163

Epson Stylus Pro GS6000
4.4.11.3 MAINTENANCE ASSY
1. Unlock the Carriage and move it to the center.
2. Remove the MAINTENANCE COVER ASSY (right only).
3. Remove the MAINTE COVER, B (right only).
4. Remove the four screws and remove the fixing plate.
A) Silver, Phillips, Cup M3x6: four pieces
As seen from the front
Figure 4-137. Removing the fixing plate
DISASSEMBLY & ASSEMBLY
(p83)
(p91)
(p92)
Fixing plate
A
Disassembly and Assembly Procedure
5. Pull off the two tubes with a joint at their ends from the PUMP ASSYs to the right.
As seen from the front
2
PUMP ASSYs
Figure 4-138. Disconnecting the tubes
Revision F
1
Confidential
163