Nozzle Check Pattern - Epson Stylus Pro GS6000 Service Manual

Epson Stylus Pro GS6000

5.4.2 Nozzle Check Pattern

This menu allows you to check the ink nozzles for clogging. If they are found to be
clogging, perform a cleaning and then check them again.
Paper Used
Size: 1250 mm
Type: None specified
Procedure
1. Turn the printer ON.
2. Start the Serviceman Program and select
3. Select Nozzle Check, and click [Run] to print a nozzle check pattern.
4. Check the printed pattern for dot missing.
5. When no dot missing is observed, click [Finish] to finish checking.
If there is dot missing, perform a cleaning (refer to ?5.4.3 Cleaning and
Washing? (Page 209)). Then print the pattern again to check
C H E C K When either A or B nozzle is found as clogged, the user can specify
P O I N T
not to use the clogged one by setting the MicroWeave setting of the
printer driver to Extra High A or Extra High B.
Figure 5-26. [Nozzle Check Pattern] Screen
ADJUSTMENT
Nozzle Check Pattern.
Head Related Adjustments
Head2 (R)
B A B A B A B A
Vertical Alignment (Color : lm, lc, G, O, Y, K, C, M) VSD3 Large MecNo . XXXXXXXXXX Date (YY/MM/DD) xx/xx/xx
Figure 5-27. Nozzle Check Pattern
Figure 5-28. Judging the Printout Result
Revision F
Head1 (L)
B A B A B A B A
208
Confidential