Epson Stylus Pro GS6000 Service Manual page 92

Epson Stylus Pro GS6000
4.4.3.7 MAINTE COVER, B
C H E C K Basically you can remove this part on the left and the one on the
P O I N T
right in the same way. Therefore this section describes the way to
remove the one on the right only.
1. Remove the MAINTENANCE COVER ASSY.
2. Remove the two screws.
A) Silver, Phillips, Pan with S.W & P.W M4x8: two pieces
3. Lift the MAINTE COVER, B and remove it.
Front Right
Figure 4-27. Removing the MAINTE COVER, B
DISASSEMBLY & ASSEMBLY
(p91)
MAINTE COVER, B
A
Disassembly and Assembly Procedure
4.4.3.8 SIDE COVER, L2
1. Remove the TOP COVER (left only).
2. Remove the MAINTE COVER T.
3. Remove the SIDE COVER (left only).
4. Remove the three screws and remove the SIDE COVER, L2.
A) Silver, Phillips, Pan with S.W & P.W M4x8: three pieces
As seen from the bottom
SIDE COVER, L2
Figure 4-28. Removing the SIDE COVER, L2
Revision F
(p85)
(p86)
(p89)
Confidential
A
92