Epson Stylus Pro GS6000 Service Manual page 140

Epson Stylus Pro GS6000
4.4.8.3 AFTER HEATER (64)/THERMISTOR, AFTER
1. Remove the MAINTENANCE COVER ASSY (both).
2. Remove the MAINTE COVER, B (both).
3. Remove the PAPER GUIDE COVER (both).
4. Open the FRONT CLEAR COVER.
5. Remove the After Heater Cover.
A) Silver, Phillips, Pan with S.W & P.W M4x8: five pieces
B) Silver, Phillips, Bind machine screw M3x6: five pieces
DISASSEMBLY & ASSEMBLY
(p91)
(p92)
(p94)
(p97)
Disassembly and Assembly Procedure
6. Peel off the heat insulator.
7. Peel off the AFTER HEATER (64)s and remove it.
8. Remove the two screws and remove the THERMISTOR, AFTERs.
A) Silver, Phillips, Pan with S.W & P.W M3x5: two pieces
Tape
After Heater Cover
THERMISTOR, AFTER
Figure 4-107. Removing the AFTER HEATER (64) and THERMISTOR, AFTER
Revision F
Heat insulator
AFTER HEATER(64)
Tape
A
140
Confidential