Epson Stylus Pro GS6000 Service Manual page 87

Epson Stylus Pro GS6000
ALARM LED
1. Remove the two screws and remove the ALARM LED.
A) Silver, Phillips, Cup M3x6: two pieces
Backside
PANEL COVER, T
Figure 4-18. Removing the ALARM LED
A D J U S T M E N T Be sure to refer to Chapter 5 "Adjustment"
R E Q U I R E D
specified adjustments after replacing or removing this part.
<Adjustment item>
1. Alarm LED Test
DISASSEMBLY & ASSEMBLY
ALARM LED
A
(see p184) and perform
Disassembly and Assembly Procedure
PANEL ASSY/PANEL COVER, T
1. Disengage the three springs from the PANEL COVER, T, and remove the PANEL
ASSY.
Backside
Figure 4-19. Removing the PANEL ASSY/PANEL COVER, T
A D J U S T M E N T Be sure to refer to Chapter 5 "Adjustment"
R E Q U I R E D
specified adjustments after replacing or removing this part.
<Adjustment item>
1. Panel Test
Revision F
PANEL COVER, T
PANEL ASSY
Springs
(see p184) and perform
Confidential
87