Cr Origin Adjustment - Epson Stylus Pro GS6000 Service Manual

Epson Stylus Pro GS6000

5.6.8 CR Origin Adjustment

This is to adjust the point of origin of the Carriage.
Procedure
1. Enter the Serviceman Mode.
Turn the printer ON while pressing [Pause/Reset] + [Paper Feed
[Menu] simultaneously.
2. Select Adjustment => CR Origin Adjust
The printer moves the carriage and gets it back slowly to its capping position to define
its origin point and register it on the MAIN BOARD ASSY.
ADJUSTMENT
] +
=> Execute.
Other Adjustments
Revision F
232
Confidential