Setting A Text Overlay Language - RADVision Scopia Elite 5100 Series Installation Manual

Procedure
Step 1
Select Configuration
The Setup tab is displayed.
Step 2
Locate the Basics section.
Step 3
Select a language in the Default user interface language list.
Step 4
Select Apply at the bottom of the Setup tab.

Setting a Text Overlay Language

Perform the procedure in this section to set the language of the text overlay messages.
The text overlay feature is set to English by default.
Procedure
Step 1
Select Configuration
Step 2
Select Customization.
Step 3
Select the required language.
Step 4
Select Apply.
RADVISION | Installation Guide for SCOPIA Elite 5100 Series MCU Version 7.7
Figure 5-3
Figure 5-4 The Video display messages section of the Customize tab
in the MCU user interface.
Basics section of the Setup tab
.
Performing the MCU Initial Configuration | 35