Preparing The Mcu Setup; Checking Site Suitability - RADVision Scopia Elite 5100 Series Installation Manual

3

Preparing the MCU Setup

Perform procedures in this section to prepare the site and device for installation.

Checking Site Suitability

Prior to installing the MCU you need to verify your site suitability for:
Read the
necessary changes in case you find that the site does not meet any of the requirements described
in that section.
RADVISION | Installation Guide for SCOPIA Elite 5100 Series MCU Version 7.7
•
Checking Site Suitability ...................................................................... page 13
•
Unpacking the Device ......................................................................... page 14
•
Inspecting for Damage ........................................................................ page 15
•
System power requirements
•
System environmental requirements
•
The device physical dimensions
Technical Specifications page 5 to learn about these requirements. Ensure to make
Preparing the MCU Setup | 13