Complying With Mcu Lifting Guidelines; Mounting The Mcu Onto The Rack Using A Shelf - RADVision Scopia Elite 5100 Series Installation Manual

Complying with MCU Lifting Guidelines

The device is very heavy and is not intended to be moved frequently. Before you install the
device, ensure that your site is properly prepared, so you can avoid having to move the chassis
later to accommodate for power sources and network connections.
Whenever you lift the chassis or any heavy object, follow these guidelines:
Lift the device from the bottom. Grasp the underside of the device with both hands.

Mounting the MCU onto the Rack Using a Shelf

This section describes how to mount the unit on to your rack:
RADVISION | Installation Guide for SCOPIA Elite 5100 Series MCU Version 7.7
•
Always disconnect all external cables before lifting or moving the MCU.
•
Do not attempt to lift the device by yourself; have someone assist you.
•
Ensure that your footing is solid, and balance the weight of the object between your feet.
•
Lift the device slowly; never move suddenly or twist your body as you lift.
•
Keep your back straight and lift with your legs, not your back. If you must bend down to lift
the device, bend at the knees, not at the waist, to reduce the strain on your lower back
muscles.
•
Locating a Shelf in the Rack.................................................................. page 20
•
Checking the Accessories Required for Mounting ......................................... page 21
•
Attaching Brackets to the MCU .............................................................. page 22
•
Marking the Location of the Device-fixing Cage Nuts .................................... page 23
•
Removing the Cage Nut Screws .............................................................. page 24
•
Mounting the Device-fixing Cage Nuts ...................................................... page 24
•
Mounting the MCU onto the Shelf............................................................ page 24
Setting up the MCU | 19