Setting A Text Overlay Language - RADVision SCOPIA Elite 5200 Series Installation Manual

Step 3
Select a language in the Default user interface language list.
Step 4
Select Apply at the bottom of the Setup tab.

Setting a Text Overlay Language

Perform the procedure in this section to set the language of the text overlay messages.
The text overlay feature is set to English by default.
Procedure
Step 1
Select Configuration
Step 2
Select Customization.
Step 3
Select the required language.
Step 4
Select Apply.
RADVISION | Installation Guide for SCOPIA Elite 5200 Series MCU Version 7.5
Figure 4-1
Figure 4-2 The Video display messages Section of the Customize Tab
Basics Section of the Setup Tab
.
Performing Initial Configuration of the SCOPIA Elite MCU | 23