Inspecting For Damage - RADVision Scopia Elite 5100 Series Installation Manual

Step 8
Carefully open the additional boxes, remove the packing material, and remove the drives and
other contents.
Note:
Step 9
After opening the shipping box, check the shipment is complete. Compare the contents of the
shipment with your packing list.

Inspecting for Damage

After you verify that all of the equipment is included, carefully examine the cards, power supplies
and cables for any damage resulting from shipping. If you suspect any damage from shipping,
contact your local freight carrier for procedures on damage claims. If you observe any physical
defects in the items you ordered, contact RADVISION Technical Support for Return Material
Authorization (RMA) form.
Note:
Before proceeding with the installation, verify that all of the ordered parts are present and in good
condition. Keep a record of the parts and serial numbers. If any parts are missing or damaged,
contact your sales representative.
RADVISION | Installation Guide for SCOPIA Elite 5100 Series MCU Version 7.7
We recommend that you keep the packaging materials in case you need to repack the
device.
Preparing the MCU Setup | 15