Technical Specifications - RADVision Scopia Elite 5100 Series Installation Manual

Technical Specifications

This section lists important data about the system you purchased. Refer to this data when
preparing system setup and afterwards as a means of verifying that the environment still complies
with these requirements.
RADVISION | Installation Guide for SCOPIA Elite 5100 Series MCU Version 7.7
•
System power requirements:
–
90-264VAC input, 50/60Hz
–
Single 400W AC power supply (default) / 48V DC power supply
–
Power consumption of a media blade: max. 250W (50°C)
–
Power consumption of an MCU including the chassis, control blade, and AC power supply:
max. 85W (50°C)
–
Power consumption of an MCU including the chassis, control blade, two media blades and
AC/DC power supply: AC 700VA (50°C), DC 585W (50°C)
–
Maximum power consumption: DC 335W (50°C), AC 392VA (50°C)
–
Heat dissipation: BTU/Hr (50°C)1445 BTU/Hr (50°C)
•
Grounding and electrostatic discharge:
–
External 4mm grounding stud per TUV requirement
•
Environmental requirements:
–
Operating temperature: 0°C to 45°C (32°F to 113°F)
–
Humidity: 5% to 90% non-condensing
–
Storage and transit temperature: -25°C to 70°C (-13°F to 158°F), ambient
–
Acoustics: 56dBA
•
Physical dimensions:
–
Size: 448mm (17.6") width x 133.35mm (5.25") height x 400mm(15.75") depth
–
Size: 448mm (17.6") width x 44mm (1.73") height x 480mm (18.9") depth
–
Weight: ~13kg (~28.7lbs)
•
Signaling protocols:
–
H.323
–
SIP
–
H.320 (in conjunction with SCOPIA H.320 Gateways)
–
H.324M (in conjunction with SCOPIA 3G Gateways)
•
Audio support:
–
Codecs—G.711. G.722, G.722.1, G.729, MPEG4 AAC-LC, Polycom® Siren14™/G.722.1
Annex C
–
DTMF tone detection (in-band, H.245 tones, and RFC2833)
•
Video support:
–
High Definition Continuous Presence video with a resolution of 1080p at up to 30fps
–
Video with 720p resolution is sent and received at up to 60fps
About the SCOPIA Elite MCU | 5