Setting Up The Mcu - RADVision Scopia Elite 5100 Series Installation Manual

4

Setting up the MCU

Mount the device onto a 19" square-hole rack. Use a shelf to support the device in the rack
(Figure 4-1 on page
These sections describe how to set up the device:
RADVISION | Installation Guide for SCOPIA Elite 5100 Series MCU Version 7.7
16).
•
Verifying Rack Suitability ..................................................................... page 17
•
Complying with MCU Lifting Guidelines .................................................... page 19
•
Mounting the MCU onto the Rack Using a Shelf ........................................... page 19
•
Attaching the System Ground ................................................................ page 26
•
Connecting Cables to the Device ............................................................ page 26
Figure 4-1 Shelf mounted MCU
Setting up the MCU | 16