Remotely Setting An End Time For The Videoconference; Changing The Video Layout From The Scopia Xt Series Mcu Edition - RADVision SCOPIA XT4000 Series User Manual

Step 3
Step 4

Remotely Setting an End Time for the Videoconference

When you are hosting a videoconference with your SCOPIA XT Series MCU Edition, you can set
an end time. You can do this from the web interface only.
For more information on managing videoconferences with an SCOPIA XT Series MCU Edition,
see
Procedure
Step 1
Step 2
Step 3

Changing the Video Layout from the SCOPIA XT Series MCU Edition

Having multiple participants in a videoconference always requires careful consideration to lay
out many windows inside one screen. The SCOPIA XT Series has a number of available video
layouts: full screen, Continuous Presence (CP) 2, CP3, CP4, CP7, CP8, and CP9.
RADVISION | User Guide for SCOPIA XT4000 Series Version 3.1
•
Select Meeting > Contacts
•
Answer a call
Repeat steps according to the number of participants allowed in your system.
Continue with:
a. To manage the videoconference, see
XT Series MCU Edition" on page
b. To choose the video layout, see
MCU Edition" on page
"Moderating the Videoconference from the SCOPIA XT Series MCU Edition" on page
Access the web interface.
Select Make your call > Conference > Settings > Scheduling.
The Scheduling page appears.
Figure 6-1
Enter the end time and date in the Day, Month, Year, Hour, and Minutes fields.
"Moderating the Videoconference from the SCOPIA
53.
"Changing the Video Layout from the SCOPIA XT Series
52.
Setting end date and time
53.
Making Videoconference Calls | 52