Activating the Screen Saver
Press
Note:
The screen saver automatically starts after the period of time set in User settings > User
preferences > General.
Entering Alphanumeric Characters
Use the Remote Control Unit keypad to type letters and digits.
Scroll to the input field and type the required characters. As you are using the default abc1 input
method, you must press the alphanumeric button repeatedly before entering a digit.
You can also select another method that best suits the type of information you want to enter in
the input field.
Press
repeatedly to select one of these methods:
Figure 3-8 on page 15
Pairing a Remote Control Unit with a Codec Unit
Multiple Codec Units can be set up in the conference room and controlled with different Remote
Control Units.
You can dedicate your Remote Control Unit to monitor one or more Codec Units of your choice by
configuring the same numeric code in your Remote Control Unit and the system software.
An XT1000 Remote Control Unit is configured with code 1 by default.
RADVISION | User Guide for SCOPIA XT1000 Series Version 2.5
on the Remote Control Unit and press
while the cursor is in the input field. The input methods are displayed. Press
•
Typing the digit first then typing letters (1abc)
•
Typing only digits (123)
•
Using the virtual keyboard. After opening the keyboard, move the cursor over the required
letter or digit and press
the virtual keyboard.
depicts the methods.
Figure 3-8
Selecting the method for entering alphanumeric characters
Shutdown no.
. Press
to delete the last entered character. Press
to close
Getting Started | 15