Section 2 Front Wheel And Front Brake; (I)Disassembly - ATV 200 Service Manual

Section 2 Front wheel and Front Brake

Ser No.
1
Tire specification
Rim dimension
2
Tire air pressure(normal
3
temperature)
4
Runout
5
Tire wear limit value
6
Wear limit value of friction wafer
Wear limit value of front brake hub
7
¢Ù
- 76 -
Technical Parameter
Item
Standard value
Min value
Max value
Radia runout
End face runact
¢Ù
¢Ú
20KPa(Standard value)

(I)Disassembly

1)Pay attention to the following points when
disassembling front wheels
a:Place the vehicle on a horizontal ground, and
press down the front brake attaching clamp
¢ Ù .
b.Loosen the connecting nut¢Ùof front &rear
wheel on the front wheel.
c:Place a bracket under the frame to pick up
the front wheels.
Warning
Support the vehicle firmly and avoid dropping
down.
2)Disassemble the connecting nut ¢Ùof front
&rear wheel.
Parameter
AT23 ¡Á7-10
5.5 ¡Á10
17KPa(Min value)
23KPa(Max value)
2mm
2mm
2mm
2mm
16mm