ATV 200 Service Manual page 182

27.Bearing and oil seal
1)Inspection
.Bearing
If jammed in operation or there are pits and
dammagd,replace it.
2)Inspection
.Oil seal
If damaged or worn replace it.
28.Circlip and washer
Inspection:
.Circlip
.Washer
If damaged loose,bent replace it.
29.Crankcase
1)Clean crankcase with soft agent completely
2)Clean all sealing surfaces and closing sur-
faces completely
3)Inspection:
.Crankcase
Cracks/damage,replace it.
.Oil trace
If jamed,blow with compressed air.
Caution
When replacing the crankcase be sure to re-
adjust the output gear washer.
- 176 -