ATV 200 Service Manual page 136

.Start the engine and accelerate to 2000r/m or so.
Charging voltage:14-15V at 2000r/m
Remark:
Use battery with full capacity
4.Resistance value for stator coil
.Take out the lighting coil of AC magneto from
inserter
.Connect pocket multimeter to stator coil(¦ ¸ ¡ Á 1)
Pocket multimeter(+)¡úWhite terminal
Pocket multimeter(-)¡úWhite terminal
Pocket multimeter(+)¡úWhite terminal
Pocket multimeter(-)¡úWhite terminal
Measure the resistance value of stator coil
At 20¡æ (68¡ãF)11.10-1.50¦¸
5.Coupling of circuit
.Check the whole coupling of charging wire.
Refer to "Electric diagram".
Replace rectified adjuster
- 130 -
Oil of specification
Meet specification
Correct
Meet specification
No failure on charging circuit
Out of specification
Repalce parts of stator coil
Poor connection
Connect the charging system correctly