ATV 200 Service Manual page 86

- 80 -
9.Check
¢ÙIf the bearing ¢Ùof front brake hub runs
out in brake hub or front wheel runs out when
rotating, replace the bearing.
¢ÚIf the oil seal ¢Úis worn or damaged, re-
place it.
¢ÙReplacing procedures of front wheel bear-
ing and oil seal
Wash the outer side of brake hub
¢ÚRemove the oil seal ¢Ùwith plain screw
driver.
Caution
When removing the oil seal with plain
screwdriver, place a cloth on the outer edge
of oil seal to avoid damage¢Ú.
Disassemble the bearing ¢Û with correspond-
ing tool.
Assemble new bearing and oil seal according
to reverse procedures of above replacement.
Caution
Use a holddown ¢Ücorresponding with out-
side diameter of oil seal.
Caution
Do not beat the inner circle of bearing or roller
, only contact the holddown and outer circle.
10.Check
¢ÙIf there is crack or damage on brake cover
assy ¢Ù , replace it.
¢ÚIf the dust-proof seal of brake cover ¢Ú is
worn or damaged, replace it.