Adjusting The Brake; Repair And Maintenance - ATV ELECTRIC MINI Owner's Manual


Loose Parts
Check and secure all fasteners before every ride. Make sure steering stem clamp bolts are
locked properly in place. There should not be any unusual rattles or sounds from loose parts or
broken components. If you are not sure, ask an experienced mechanic to check.

Brake
Check the brake for proper function. When you squeeze the lever, the brake should provide
positive braking action. When you apply the brake with the speed control on, the brake cut-off
switch will stop the motor.

Frame, Fork and Handlebars
Check for cracks or broken connections. Although broken frames are rare, it is possible for an
aggressive driver to bash into a curb or wall and wreck and bend or break a frame. Get in the
habit of inspecting yours regularly.

Tire Inflation
Periodically inspect the tires for excess wear, and regularly check the tire pressure and
re-inflate as necessary. If you get a flat tire, the inner tube can be patched or a new tube can
be purchased from Razor or an authorized repair center.

Safety Gea
r
Always wear proper protective equipment such as an approved safety helmet, elbow pads and
kneepads. Always wear shoes (lace-up shoes with rubber soles), never drive barefooted or in
sandals, and keep shoelaces tied and out
of the way of the wheels, motor and drive system

REPAIR AND MAINTENANCE

Turn power switch off before conducting any maintenance procedures.
 Adjusting the Brake
The mini quad is with 2 front brake and 1 rear brake.
WARNING: The brake is capable of causing the electric mini quad to skid the tire throwing an
unsuspecting rider. Practice in an open area free from obstacles until you are familiar with the
brake function. Avoid skidding to a stop as this can cause you to lose control or damage the
rear tire.
REPAIR AND MAINTENANCE
- 18 -