Section 4 Running Of Starting Circuit - ATV 200 Service Manual

Section 4 Running of starting circuit

- 122 -
The starting circuit of this vehicle include start-
ing motor, cut-off relay, rear brake switch and
neutral switch. If the main switch is in position,
the starting motor could be operated only at
the following conditions:
.Driving device is at neutral position(neutral
switch is closed)
.Tension brake switch (rear brake is closed)
When the vehicle is in driving or reverse start,
and the rear brake is in idle start, then the cut-
off relay will prevent starting device from
running.On this condition, cut-off relay is
closed, which leading the current can't reach
to starting motor.
When driving device is at neutral
position.
When rear brake is tensioned
¢Ù Battery
¢Ú Start motor
¢Û Start relay
¢Ü Cut-off relay
¢Ý Start switch
¢Þ Rear brake switch
¢ß Neutral switch
(A)To main switch
(B)From main switch