ATV 200 Service Manual page 187

1. Balance shaft gear and driving gear
1) Installment
¡¤ Semicircle key
¡¤ Driving gear of balance shaft
¡¤ Circlip
Caution
Use the gear puller.
2) Installment:
¡¤ Balance shaft gear(be driven)
¡¤ Flat key
Caution
The mark of driving gear should align with the
mark of driven gear.
3) Installment:
¡¤ Locking washer
¡¤ Nut (Dirven gear)
Caution
¡¤ Be sure to use new locking washer.
¡¤ Install the locking washer locating plate in-
side the key groove of balance shaft.
4) Tighten up:
¡¤ Nut (Driven gear)
Caution
Place a fold cloth between the balance shaft gear
and the gear of driving gear so as to avoid turn-
ing of shaft, then tighten up the nut.
5) Bend the locking plate of locking washer.
- 181 -