ATV 200 Service Manual page 192

- 186 -
11) Installment
¡¤ Washer
¡¤ Main clutch case assy
¡¤ Washer
¡¤ Clutch shoe assy
Caution
¡¤ There are two indents on the vice clutch case.
When installing the main clutch case, one of the
indents should align with the main clutch gear.
12) Installment:
¡¤ Locking washer ¢Ù
¡¤ Nut ¢Ú(Main clutch)
¢Ú
Caution
¡¤ Be sure to use new locking washer
¢Ù
¡¤ The locating plate of locking washer should
be installed in the indent of clutch shoe assy.
13)Tight up:
¢Ú
¡¤ Nut ¢Ú(Main clutch)
Caution
¢Ù
Fasten the clutch shoe assy, then tighten up nut.
14)Bend the locking plate ¢Ûof locking washer.