Section 7 No Charging In The Battery - ATV 200 Service Manual

Section 7 No charging in the Battery

Steps
Check:
1.Safety
2.Battery
3.Charging voltage
Remark
.Remove some parts before maintenance
1)Cushion
.Repair with following special toolings
1.Safety
Refer to "Inspection of switch"
2.Battery
.Check battery condition
Refer to "Inspection of Battery"in charter 3
Voltage:
12.8V or more at 20¡æ(68¡ã F)
3.Charging voltage
.Connect engine tachometer to the wire of spark
plug
.Connect pocket multimeter(DC20V)to the battery
Pocket multimeter(+) ¡ú
Pocket multimeter(-) ¡ú White terminal
4.Stator coil
5.Coupling of circuit
(Whole charging system)
Pass
Correct
White terminal
Coil tachometer
Engine tachometer
Pocket multimeter
NO electrification
Replace the safety
Incorrect
.Clean battery terminal
.Recharge or replace battery
- 129 -